WATERFALL, DYNAMENT LIFE SYMBOL OR REVIVING?
Rivers and waterfalls are associated with "groundwater", although in fact waterfalls are more often in the mountains and cliffs, like rivers often start from there. You can see a lot…

Continue reading →

Types of water supply
Types of food ponds. The type of water supply is one of the main indicators characterizing the features of the design and functioning of the reservoir. Four main types of…

Continue reading →

Pool Equipment Tips

During the construction of the pool should be borne in mind that this room has a high level of humidity, so the materials for finishing should have a moisture resistance and, preferably, have a non-slip surface.
When finishing a pool bowl it is necessary to use a film or a special tile. Tiles can be replaced with PVC film. It is placed on the bottom of the bowl. Modern films have excellent performance and successfully imitate ceramic tiles.
Pool interior
Being engaged in lighting of the pool, it is necessary to follow safety requirements. An excellent panoramic view and strong natural lighting can be achieved by creating one of the walls in the form of a frame translucent structure made of double-glazed windows.
Part of the roof above the pool, if it is not in the basement, but in a separate structure, can be made as a glazed canopy. He will be able to withstand sudden temperature drops and a significant snow load. But, nevertheless, it will be necessary to clean the roof from time to time. An original solution would be to use a rooflight, in other words, a glazed opening in a flat roof. It is installed above the atriums. This lamp radiates natural light indoors. In the summer, he should let in as much light as possible, and in the winter, he must keep heat warm. For this purpose it is covered with special materials.
Ventilation and dehumidification
Since the temperature of air and water in the pool is significantly higher than in other rooms, the volumes of evaporated air increase greatly. Without installing the necessary power ventilation, this may cause a wet mist to appear over the water.
For outdoor pools, the problem of high humidity does not exist. But indoor pools need a thorough ventilation system, otherwise the walls from the inside will be covered with abundant condensate. In the pool, ventilation must be forced-air and exhaust. It should not depend on obschedomovoy. This is necessary for the reason that the pool has a special mode of humidity and heat transfer. Ventilation capacity will depend on the size of the room and the pool. At the same time, the volume of air entering the room must be greater than that drawn out.
In addition to the ventilation system, you can install compressor air dryers. Experts recommend immediately put industrial or semi-industrial options. Dehumidifiers to be wall and hidden. If the dehumidifier is hidden, then you must pre-select a place for it. A place for wall driers can be found after the construction and finishing works.

Swimming pond construction
Your dream is to have a place to swim in your plot, but the pool doesn’t fit well with the concept of a natural garden? This is not a problem,…

...

Ouzoud Falls in Morocco
Morocco can be called a country with unique and luxurious natural sights, where there is a huge variety of natural landscapes: mountains, valleys, deserts, forests, parks, gardens. Of all the…

...

Pool selection
Each of us dreams of a spacious and large area, which will be located comfortable and beautiful swimming pool. Very lucky in this sense, the owners of country houses or…

...

Water location
Depending on the location on the relief, in the riverbed, floodplain all water bodies are divided: • on reservoirs on the relief (basically, these are reservoirs-digging), which, in accordance with…

...